Granite Surface Plate Grade 0 & 00 Size : Variable (As per customer requirement) Grade 0 µm : 7 µm Grade 1 µm : 14 µm

Our Osram Halolux Ceram 64402 230v 150w has a clear finish, offers an improvement of 15% in light output when compared to a regular household light bulb and offers double the life at 2000 hours. Osram Halolux Ceram bulbs work directly from the mains so can directly replace household light bulbs and are fully dimmable. … Continue reading “Lamp for lumen calibration”

Product features Gas-filled incandescent lamps Areas of application Comparison standards and calibration lamps Measurements in photometry, colorimetry and photophysics Calibration for measurement of: luminous intensity, luminous flux Calibration for measurement of: black body temperature, color temperature, spectral radiant intensity distribution Safety advice Information on safety and handling is available on request or can be found … Continue reading “WI41G Lamp”

Specification- Wind Velocity Range : 0.0-45.0 m/s Resolution – 0.001 , Accuracy – ±3%±0.1 Wind flow range – CMM: 0-999900 m³ /min Range – 0-999900 , Resolution – 0.001-100 Air Temperature Range – 0.0-45.0 °C , Resolution – 0.1            

Specification- Range 0-2000 / 6000 / 12000 Microns Principle Magnetic Induction Resolution 0.10/1.0 Minimum Area 6mm Minimum Sample Thickness 0.30mm Battery Low Battery Indicator Operating Temperature 0-45 C Dimension 100x50x10mm Packing Wooden Box Weight 300 grams Cable Yes – External

Specification- Range: 0-1250 Microns Principle Magnetic Induction Resolution: 0.10/1.0 Accuracy: +-(1-3%) or 2.5 microns Minimum Area 5mm Minimum Sample Thickness: 0.3mm Standards: ISO2178, ISO2360 , DIN , ASTM Operating Temperature: 0-45 C Dimension: 102 x 66 x 24mm Weight: 100 grams

Specification- Range: 0-150 mm Resolution: 0.01 mm Range: 0-6 Inch Resolution: 0.0005 Inch Upper Jaw Length: 16.5 mm Battery: Button Type Includes Product Catalog , Plastic Case and Inspection Certificate Overall Length 233 mm Display: LCD Accuracy: 0.001 Inch Lower Jaw: Length 40 mm Applications Used: For measuring Internal Dia , Outer Dia , Depth … Continue reading “Vernier Caliper -0 to 150 mm(Mitutoyo 500-196-30)”

Specification- Range: 0-300 mm Resolution: 0.01 mm Range:  0-12 Inch Resolution: 0.0005 Inch Material: Stainless Steel Upper Jaw Length: 21.8 mm Battery : Button Type Display: LCD Features: Origin-set, Zero-set, Inch/mm, Automatic Power On/Off, Data Output, Low Voltage alarm, Counting Value Composition Error alarm. Accuracy: 0.0015 inch Lower Jaw Length: 64 mm Applications: measuring Internal … Continue reading “Digital Vernier Caliper/Digimatic Vernier 300Mm (Mitutoyo 500-754-10)”

Specification- Range (Lux): 0-50000 Accuracy:  ±5%+10d Display: 3½ Digits Counts:  1999 Counts Repeatability: ± 2 % Operating Humidity: ˂ 80 % R.H Storage Temperature: -10°C to 60°C Power Supply: 1×1.2V Battery Dimension (LXWXH): 188×64.5×24.5 mm

<div class=”no_product_detaildesc” id=”anchor_product_desc”> <div class=”title”> Detailed Product Description</div> <table cellpadding=”0″ cellspacing=”0″ class=”details_table”> <tbody> <tr> <th>Standard:</th> <td>GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000</td> <th>Suitable Luminaire:</th> <td>Floodlight Luminaire</td> </tr> <tr class=”bg_gray”> <th>Bending Angle:</th> <td>0～180º Adjustable</td> <th>Test Frequency:</th> <td>1～10 T/ Min</td> </tr> <tr> <th>Test Time:</th> <td>0～999999times Adjustable</td> <th>Working Voltage:</th> <td>AC220V 50HZ</td> </tr> </tbody> </table> <div class=”details_wrap”> <div class=”clearfix”></div> <p></p><p>&nbsp;</p> <p><span … Continue reading “PCL Control Led Light Tester Luminaire Adjustment Test Device Easy Operation”

Compression Test for the verification of resistance to heat   EN50075 1991 Fig10 comprises two steel jaws, having a cylindrical face of 25 mm radius, a width of 15 mm and a length of 50 mm. Weight 20N.

EN 50075 Figure 7 Arrangement for compression test a steel base; a steel plate; and a weight of 150N.

EN 50075 Figure 4 Gauge for checking the possibility of single pole insertion of plugs into socket-outlet

UL 498 Gauge 1 UL498-figure9.1 Articulate probe with web stop 　 2 UL498-figure10.1 Prode 　 　 　 3 UL498-figure31.1 Flat prode 　 　 4 UL498-figure69.1 Reference plug 　 　 5 UL498-figure94.1 Impoper insertion test blades 6 UL498-figure105.1 Test plug 　 　 　 7 UL498-figure105.2 Test blade 　 　 8 UL498-figure118.1 Receptacle test fixture 　 9 … Continue reading “UL 498 Gauge”

1. NFC613-14/C1               Gauge for checking impossiblity of single-pole insertion of plugs (6A/16A) 2. NFC613-14/C2               Gauges for size of entry holes for plug pins (5.3mm/5.8mm) 3. NFC613-14/C3A.B.C     Gauges for distance to point of first contact ( 5.75/5.0/5.25mm, 6A; 5.45/5.60/5.75mm, 16A) 4. NFC613-14/C4A.B.C     Gauges for minimum opening contact tubes (3.94mm, 300/150g; 3.80mm, 400/200g; 4.60mm, 400/200g) 5. NFC613-14/C5              … Continue reading “NFC 613-14 gauge list”

EN 60320 gauge SheetC1.C5

EN 60320 gauge SheetC5 “GO” Gauge for Connectors to Standard Sheet C5

EN 60320 gauge Sheet C7

EN 60320 gauge Sheet C9 Figure 9A “GO” Gauge for Connectors to Standard Sheet C9

EN 60320 Sheet C13.C15.C15A

EN 60320 gauge SheetC13 “GO” Gauge for Connectors to Standard Sheet C13

EN 60320 gauge SheetC17 Figure 9K “GO” gauge for connectors to standard sheet C17

EN 60320 Sheet C19.C21.C23

EN 60320 Sheet C19.C21

EN 60320 gauge Sheet D

EN 60320 SheetC9.C13.C15.C15A

EN 60320 gauge Figure 102

EN 60320 gauge Figure 101

EN 60320 gauge Figure 27 List

EN 60320 gauge Figure 22

EN 60320 gauge Figure 9S

EN 60320 gauge Figure 9Q

EN 60320 gauge Figure 9Q

EN 60320 gauge Figure 9M

EN 60320 gauge Figure 9K

EN 60320 gauge Figure 9H

EN 60320 gauge Figure 9G

EN 60320 gauge Figure 9F

EN 60320 gauge Figure 9C

EN 60320 gauge Figure 9B

EN 60320 gauge Figure 9A

EN 60320 gauge Figure 9

EN 60320 gauge Figure 8

EN 60320 gauge Figure 7

EN 60320 gauge Figure 6

EN 60320 gauge Figure 5

 UL Sharp Edge Tester The UL Sharp Edge Tester is used for determining the sharpness of edges of electrical equipment and other consumer products. It is made of tough metal (not plastic). All moving mechanisms are protected against dirt and breakage. The UL Sharp Edge Tester is also used for compliance with US Federal regulations … Continue reading “UL sharp edge Tester, toy sharp edge test, toy testing equipment”

Sharp Point Tester is used to examine a toy of position whether the existence endanger safe of sharp-edged sharp point. Belongs toToy Safety Test; All accessorieses is made of nonrust material . The technical parameters requirement of all countries is consistent. Dimensions: 112x 16x16mm Weight: 1 pound Standards: 16 CFR 1500.48, ASTM F963 4.8, EN-71 1998 … Continue reading “sharp point tester, point test, toy testing equipment”

The Sharp Edge Tester is used to examine toys in normal use and after resonable abuse whether exist or produce the danger of cut,belongs to the Toys safety Test Item.Metal shell is durable. The king-size footswitch makes operation more convenient. Special photoelectric sensor indicates force value function,to assure the test force fix in 1.35 pounds when testing. … Continue reading “Sharp edge Tester, toy sharp edge test, toy testing equipment”

Projectile Velocity Tester  Projectile Velocity Tester is used to determine the size catapults kinetic energy of toys, the ejection of parts of the test apparatus through the tube or external testing of the components of the two sensors detect the ejection toy parts used away after a certain period of time, it has calculated the move … Continue reading “Projectile Velocity Tester, toy test, toy testing equipment”

Bite Test Clamp Bite Test Clampsimulates a child biting the accessible area of toys. The part of the toy being tested is placed in a bite test clamp & a specified force is applied for a specified period. The toy is then tested to ascertain whether or not any hazards result from the bite test … Continue reading “Bite Test Clamp, toy test, toy testing equipment”

Small Parts Cylinder  Small Parts Cylinder is used to determine whether toys & other articles intended for use by children under 3 years old present choking, aspiration, or ingestion hazards because of small parts. If any objects can fit completely into the cylinder without compressing & in any orientation, it is defined as a “Small Part”. … Continue reading “Small Parts Cylinder, toy test, toy testing equipment”

Small ball test gauge Small ball test gaugeis use to examine a toy up of whether small ball accessories may result in the child swallow, stop breath way and esophagus to cause choking danger or not. Standards:16CFR 1510 / ASTM F 963 4.6.2 EN71-1998 8.16 GB6675-2003 A.5.3 Standard Configuration: Small ball test fixture 1 pcs … Continue reading “small ball test gauge, toy ball test, toy testing equipment”

Pacifier Tester Pacifier Testeris used to detect “pacifier class” toy conforms to safety standards Role:testing security instruments-pacifier Material: Aluminum Standards: 16 CFR 1511 ASTM F 963 4.22 Dimensions: 102*76*8.5mm Weight: 120g

Accessibility Probes Accessibility Probes is used to determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility … Continue reading “Accessibility Probes”

Position and clamp template A shown in Figure 24 so that the axis of the slot is substantially vertical and the slot is unobstructed at its top and bottom openings. Orientate the toy in a position which would most likely permit the entry of the toy through the slot in template A. Place the toy … Continue reading “EN71-1 Template A and B”

The aim of the tests is to assess whether or not the head of a child can fit through a fixed loop. CEN/TR 13387:2004 has been used as the source for the appropriate head dimension for children of less than 3 months   This probe is 96 mm in width, has two hemispherical ends with … Continue reading “EN71-1 Head Probe”

Description: Suitable for thick and high voltage electric wire electric cable spark testing, line to center high 1 m plus or minus 20% can be adjusted. This SCR50A series power frequency spark tester used for detection of all kinds of electric wire electric cable bare copper, broken skin, pinhole, etc insulation fault point. 1.comply with … Continue reading “Power Frequency Spark Tester SCR50A”

Description :    SCR015A High Frequency spark tester is a efficient and  reliable product inspection tool, a precision instrument to detect various types of wire and cable the conductor insulation layer of pinhole, broken skin, bare copper and so on poor insulation points. It can quickly detect the layer defect without damaging the inner electrical … Continue reading “HF Spark Tester SCR015A”

Description :    SCR015K High Frequency spark tester is a efficient and  reliable product inspection tool, a precision instrument to detect various types of wire and cable the conductor insulation layer of pinhole, broken skin, bare copper and so on poor insulation points. It can quickly detect the layer defect without damaging the inner electrical … Continue reading “HF Spartk Tester SCR015K”

Description :    SCR015S High Frequency spark tester is a efficient and  reliable product inspection tool, a precision instrument to detect various types of wire and cable the conductor insulation layer of pinhole, broken skin, bare copper and so on poor insulation points. It can quickly detect the layer defect without damaging the inner electrical … Continue reading “HF Spark Tester SCR015S”

Description: Suitable for coiling machine,  rolling machine, detection cable insulation fault, line to center height of 0.7 M plus or minus 20% can be adjusted. This SCR50AC series power frequency spark tester used for detection of all kinds of electric wire electric cable bare copper, broken skin, pinhole, etc insulation fault point. 1.comply with the … Continue reading “Power Frequency Spark Tester SCR50AC”

Description :    abet5015E High Frequency spark tester is a efficient and  reliable product inspection tool, a precision instrument to detect various types of wire and cable the conductor insulation layer of pinhole, broken skin, bare copper and so on poor insulation points. It can quickly detect the layer defect without damaging the inner electrical … Continue reading “HF Spartk Tester abet 5015E”

Description: Suitable for three single twister and cable machine, line to center height of 1 M plus or minus 20% can be adjusted（special height made to order）. This abet50AC series power frequency spark tester used for detection of all kinds of electric wire electric cable bare copper, broken skin, pinhole, etc insulation fault point. Test … Continue reading “Power Frequency Spark Tester abet 5015AG”

IPX9K-1000 Water Spray Tester IPX9K-1000 Water Spray Tester Feedback Detailed Product Information The test room includes test desk,reservoir,control box,production dehydration buffer and spray system Technical Parameter: 1. Internal size:D1000×W1000×H1000㎜ 2. External size:D1200×W1500×H1900㎜ 3. Spray system:consists of Italian high pressure high temp. water pump,high pressure high temp. hydraulic pressure gauge,high pressure high temp. solenoid valve 5. … Continue reading “IPX9K-1000 Water Spray Tester”

Product details: Model KP-CK10.    To test the surge strength according to IEC60065 figure 6 and UL1310 clause 40.2, with upper metal pin having a 5 mm diameter ,mass of 100 g and a 6.35 mm diameter, mass of 50 g, lower metal pin and frame holder.

Description: This test chamber is use to verify protection against drip water; second characteristic numeral 1 and 2(drip test) accord to IEC60529.   Specifications: Product: IPx1x2 drip test chamber Model: KP-IPx102 Internal size: 800*800*800mm Outer size: 1000*1200*1700mm Drip area: 600*600mm Distance from drip box to test sample: 200mm Drip hole aperture: 0.4mm Distance from each … Continue reading “IPx1x2 drip test chamber”

IPx3: 60°on the either side of the vertical IPx4: 180°on the either side of the vertical   The support(turnable) for the enclosure is perforated,not turn under spray test   Holes: diameter 0.4mm Flow rate: 0.07 l/min per hole Tube radius: 400mm Test time: 1-999999min Water pressure: 80-120Kpa Power: AC 220V ±10% 50/60Hz

UL Rain test system  

material: metal, except where otherwise specified linear dimensions in milimeters   tolerance on dimensions without specific tolerance:   on angles: 0/-10°   on linear dimensions:   up to 25mm: 0/-0.05   over 25mm: +/-0.2 both joints shall permit movement in the same plane and the same direction through an angle of 90°with a 0 to … Continue reading “IEC 60529 Jointed test finger 12mm, IP2X”

IEC60529 Test Wire 1.0mm, IP4X Ø1mm, 100mm long Conforms to IEC60065, IEC60529, IEC61032

Ø2.5mm, 100mm long Conforms to IEC60065, IEC60529, IEC61032 This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.

This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with the back of the hand.

The device is use to supply water for waterproof test IPX1 to IPX6.     Specifications: Volume: 100L Flow control: smart control, select and preset on control cabinet Big flow pump: 0-7cbm/h (manual control regulator) Small flow pump: 0-3cbm/h (preset on control cabinet, digital controller adjust) Flow control: digital flow meter real-time monitor, frequency convertor … Continue reading “Waterproof test water supply system”

  IPX1, IPX2, IEC60529, GB4208, vertical drop test box. IPX1 uses the vertical drop of water tank, shell in the speed of 1r/min turntable, turntable axis and the specimen axis distance eccentricity is about 100mm, the water flow is 1mm/min, duration of 10 minutes. IPX2 uses the vertical drop of water tank, shell four fixed … Continue reading “IEC 60529 Drip Box, IPX1/IPX2”

  Dust chamber 1. Use Dust Test chamber is applicable to all kinds of auto parts do dust proof test, the test unit can be light, instrument, electrical dust cover, steering system, door lock, etc., and test product sealing. 2. Based on the standard IEC60529; IEC60598-1:1999; GB/T10485-2008 3. Characteristics With the rapid development of modern … Continue reading “IP5X IP6X Dust Test Chamber”

    The test is made using one of the two test device described in figure 4 and in figure 5 in accordance with the relevant product standard. a) Conditions when using the test device as in figure 4(oscillating tube)   the total flow rate is adjusted as specified in table 9 and is measured … Continue reading “IEC 60529 oscillating tube tester, IPX3/IPX4”

  IEC60529 IPX5/IPX6 Hose Nozzle |APPAREIL POUR LA VERIFICATION DE LA PROTECTION CONTRE LES JETS D”EAU(BUSE)     A proof against water spray test device is based on the relevant provisions of the standard IEC60529IPX5/6, GB4208IPX5/6 and other standards for production, with the rain function appliances or electrical test of the waterproof performance test.   … Continue reading “IEC 60529 Hose Nozzle 6.3/12.5mm, IPX5/IPX6”

  121 holes of 0.5mm;     1 hole at the center     1 inner circles of 12 holes at 30°pitch     4 outer circles of 24 holes at 15°pitch Moving shield – Aluminium Spray nozzle – Brass Hand-held device to verify pretection against spraying and splashing water; second characteristic numeral 3 and … Continue reading “IEC 60529 Spray Nozzle, IPX3/IPX4”

  Non-combustibility test (EN ISO 1182)           一、Description This apparatus determines the non-combustibility performance, under specific conditions, of homogeneous products and substantial components of non homogeneous building products. The specimen is subjected to temperatures of 750°C in a vertical tube furnace.The specimen is observed for sustained flaming and temperature rises and furnace thermocouples are used to assess combustibility.The test is relevant to classes A1,A2,A1fl and A2fl.   二、Specifications •　power supply： AC220V±10% 50Hz。 •　heating furnace：Φ95 mm×Φ75 mm×150 mm； •　resistance tape：3 mm×0.2 m of 80% nickle 20% chromium； •　holder weight：15g+2g； •　air cover：Φ75 mm×500 mm； •　thermocouple：insulated shield Φ3 mm nickle chrome thermocouple； •　voltage stabilizer：1.5kvA, voltage wave less than ±1%； •　voltage regulator：0～100V； •　thermometer：0～1000℃±5%； •　timer：0～99h；     三、features   # fully meet the requirements of standard EN ISO 1182 # easy operate on control device # test result display on control device directly     

    Ignitability test (EN ISO 11925-2)           Description   Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 450-tilted burner is advanced horizontally until the flame (length 20 mm) reaches the pre-set contact point with the test specimen. Tests may need to be conducted to either surface exposure or edge exposure, or both. The flame application time is 15 or 30 seconds as required by sponsor. During the test following is recorded: whether ignition occurs; whether the flame tip reaches 150 mm above the flame application point, and the time at which this occurs; whether ignition of the filter paper occurs; observations of physical behavior of the test specimen.   二、Specifications    This apparatus made up of two parts: burning chamber and control device. Burning chamber:   Dimension: 700 * 400 * 810mm   Burner: diameter 0.17mm burner with regulator   Burner angle: 45°   Vent: diameter 150mm on the top   Material: stainless steel   Observing window: two big viewing windows on the front and right side Control device:   Power supply: 220VAC   Timer: two separate timers record the burning time and lasting time   Fan: on or off   Lighting: on or off   三、features * Stainless steel test cabinet, satisfy the requirements of the newest standards; * Two big observing windows to let operator view test process easy; * Bottom of cabinet is cross-shaped stainless steel reseau to keep well venting; * Specimen holder can move up & down and left & right; * Equipped with two stainless steel specimen holders to satisfy different test standards.

    Heat of combustion test  (EN ISO 1716)               一、Description   Oxygen bomb calorimeter is used to perform this heat of combustion test. This instrument determines the potential maximum total heat release of a product when completely burning regardless of its end use.The test is relevant to classes A1,A2,A1fl and A2fl.The test specimen of a known mass is burned under standardized conditions, at constant volume in an atmosphere of oxygen, in the bomb calorimeter which is calibrated by combustion of benzoic acid.The calorific value determined under these conditions is calculated on the basis of the measured temperature rise while taking account of heat losses.     二、Specifications   Temperature measure range: 5 ℃ – 45 ℃ Temperature resolution: 0.0001 ℃ Calorific precision: is better than 0.2% (benzoic acid) Power supply: AC220V ±10% 50Hz Quantitative error: ±1g or less Measure range max: 10450 j/K Test time: about 15 min Cooling medium: water Cooling medium temperature: min 10℃ to max 30℃     三、features   # water filling and drainage automatically # water temperature adjust automatically # automatic ignition # can be control by computer # test result printing automatically(connect with a printer)    

  * Temperature measuring range: 0 ~ 1000 ℃ * Thermocouple : K-type Φ0.5mm Accuracy ± 0.05%. * Test procedure: test procedures manual control, independent ventilation * Reference standard : UL 94-2006, IEC 60695-11-3, IEC 60695-11-4, GB/T5169.15.16,17,22-2008 * Studio volume : more than 0.75 cubic * Operating efficiency : test control process to achieve one … Continue reading “Horizontal-Vertical Flame Test Chamber”

Specifications： 1. the electrode material: brass electrode tip – Platinum 2. the electrode pressure: 1.0 ± 0.05N 3. distance between electrode: 4.0mm ± 0.01mm, angle of 60 ° ± 5 4. the electrode voltage: 100 ~ 600V (48 ~ 60HZ) adjustable, short-circuit current in the 1.0 ± 0.1A voltage drop is less than 8% 5. … Continue reading “Tracking Tester”

Product Purpose      VOC release capsule of interiors can provide standard testing environment(such as appointed temperature,relative humidity,air exchange rate and airflow rate) or simulate real indoor environment and test the pollutant release rate and release properties of various indoor materials and products,then it can:     • Confirm the influence of environment variables on … Continue reading “VOC Release Capsule of Interiors”

Product purpose     Pretreatment room can provide standard temp.,humidity and voc clean environment.After temp. humidity,pressure and voc of testing materials are released in balance,pollutant release rate and release properties of material and products will be tested.      Principles     Place materials and products or their samples in the pretreatment room, and adjust … Continue reading “VOC Pretreatment Room”

Product purpose        • To detect substance released on the material surface in steady temperature.First,data of volatile substances and molecular materials before modification;Second,comparison of product properties(such as different colors or patterns)within the effective range;Third,detection of sample machine and low volatile materials;fourth,detection of the consensus of products during official authentication test.   • Measure … Continue reading “Micro VOC Release Chamber”

Product purpose     High temperature test chamber can be used to test and confirm the odor detection and testing with small sampling bag method of storage and usage of such products as Electrician,electronics,automotive electrical materials,agricultural products and leather under high temp.    Feature      Accurate control of temp. and wind speed is achieved … Continue reading “Odor Test Chamber”

Test principles The process of the test of pollutant release with the environmental chamber can be                 summarized as: putting materials and products or their samples in the test chamber,                         and adjusting environmental conditions such as temperature in the chamber,relative- ly humidity and air exchange rate;sampling at the exhaust port or the inside of … Continue reading “VOC Test Chamber of The Whole Vehicle”

Usage:  *confirm the influence of environment variables on the release rate and release properties of materials and products; *Grade materials and products according to their release properties; *Develop and validate the proposed model of indoor air pollutions;   *Evaluate indoor air quality(IAQ) according to the data and proposed model of indoor pollutants;    Reference Standards: … Continue reading “Formaldehyde Release Capsule”

Product Purpose        Environmental chamber can provide standard testing environment(such as appointed temperature,relative humidity,air exchange rate and airflow rate) or simulate real indoor environment and test the pollutant release rate and release properties of various indoor materials and products,then it can:  • Confirm the influence of environment variables on the release rate and … Continue reading “High Temperature Test Chamber of Aldehyde Ketone from the Interiors(Sampling bag method)”

Product Purpose    Environmental chamber can provide standard testing environment(such as appointed temperature,relative humidity,air exchange rate and airflow rate) or simulate real indoor environment and test the pollutant release rate and release properties of various indoor materials and products,then it can:      • Confirm the influence of environment variables on the release rate and … Continue reading “VOC Release Chamber of Electric Appliance”

Product Purpose        Full scale VOC release capsule can provide standard testing environment(such as appointed temperature,relative humidity,air exchange rate and airflow rate) or simulate real indoor environment and test the pollutant release rate and release properties of various indoor materials and products,then it can:     • Confirm the influence of environment variables … Continue reading “Full Scale VOC Release Capsul”

Usage:    *Confirm the influence of environment variables on the release rate and release properties of materials and products; *Grade materials and products according to their release properties; *Develop and validate the proposed model of indoor air pollutions;     *Evaluate indoor air quality(IAQ) according to the data and proposed model of indoor pollutants;   … Continue reading “VOC Release Chamber”

Product Purpose     Environmental chamber can provide standard testing environment(such as appointed temperature,relative humidity,air exchange rate and airflow rate) or simulate real indoor environment and test the pollutant release rate and release properties of various indoor materials and products,then it can:       • Confirm the influence of environment variables on the release … Continue reading “Full Scale Formaldehyde Release Chamber”

Product details: Model KP-LJ2:   The Plug torque tester is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus as shown in IEC60065 Figure 11. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.  … Continue reading “Socket Outlet Torque Balance”

Covering Scratch Tester  Product details: Model KP-NH12. The device is used to check abrasion strength of printed circuit boards scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests.     The scratches are made by means … Continue reading “Covering Scratch Tester”

functional description：This test chamber is our company according to IEC60950-1:2005&GB4943.1-2011 standard NO.328 clause require to design manufacturer.This optical instrument test equipment is use for test of information technology equipment product’s meander & radius.The equipment is sample using that enlarge the samples may be adjusted in the computer test sample position scale with Intelligent optical measuring … Continue reading “curvature radius test apparatus”

  product description Execution standard：gb/t4074.5-2008 & iec60851-5：2004 & refer to the United States nema & Japan jis standard Inspection standard：jb/t4279.11-2008 Satisfied gb/t6109-2008 standard require It use for Nominal diameter of conductor 0.100-2.500mm enameling round wires breakdown voltage test method of twisting test sample preparation of auxiliary equipment Initialize any twist the number of turns Automatic display twisting results weight distribution 0.85n,1.7n,3.4n,6.5n,13.5n each one，27n×3 pcs (weight plastic pothook )of one piece

      IEC61588Insulation Material Layer abrasion resistant Test Device This Mandrel Test Device according to IEC61588Fig6/IEC60950appendix and IEC60065/GB19212 standard relate clause design manufacture dedicated instrument.   The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel plated steel or brass with smooth surface finish. A metal foil shall … Continue reading “EC61588 / 60065 Mandrel Test Device forInsulation Material Layer abrasion test”

    Put the dabber on the chuck, then lock Put the test round-wire inserted to dabber’s hole   Add corresponding mass on wire  , Make the wire bear the tension exactly to touch with the pole when the wire was winding. At the same time, avoid that Stretching and twisting with the wire. With … Continue reading “Reel test apparatus”

Type:KP-SC2200   1. Use Dust Test chamber is applicable to all kinds of auto parts do dust proof test, the test unit can be light, instrument, electrical dust cover, steering system, door lock, etc., and test product sealing. 2. Reference standards IEC60529; IEC60598-1:1999; GB/T10485-2008 3. Characteristics   With the rapid development of modern industrial technology, electrical, … Continue reading “Dust Chamber”

  Description: This UV test chamber is design and manufactured for products aging test. This equipment is use to conduct a UV test to determine color fastness in products. A sample is put into the UV test chamber where it is subjected to ultraviolet exposure in a controlled environment. A solar simulator is used to … Continue reading “Laborotary UV Test Chamber”

  Description: Amount of ozone in the atmosphere is small, while it is the main factor of rubber cracking. Ozone aging test chamber simulate and strengthen the ozone in the atmosphere condition, studied the effect of ozone on rubber. Identify and evaluate the performance of rubber resistance to ozone aging and protective efficacy of antiozonant, … Continue reading “Ozone Aging Test Chamber”

  Description: This equipment is suitable for electronic, electric appliance, instrument, food, vehicles, metal, chemical, building materials, aerospace, medical, and other products, for quality detection. This equipment has the advantages of easy operate, fast heating, high precision, temperature be even and stable.   Features 　1. Test box made of stainless steel, shell made of SUS304 steel or A3 coating plate. 　2. Good performance silicone rubber … Continue reading “Programmable Temperature and Humidity Chamber”

  Description:   This chamber is design and manufactured accord to the requirements of IEC 60884, IEC60598 and relevant standards. It is use to simulate a high temperature environment to test the ability of material to withstand thermo-mechanical stress.   This machine can be wide used in many industries such as Electrical Appliances, Electrical wire … Continue reading “Ventilation Type Aging Oven”

Description:   Cold chamber, also called low temperature test chamber, is widely used to test and determine the performance of electrical, electronic products, plastic, plastic product, rubber, rubber products, or other materials stock and use in low temperature environment.   Reference to the requirements of standards: ASTM-D1790 D-1593, JIS-K6545, GB/T 2423.1-2008etc.   This machine has the advantages … Continue reading “Low Temperature Test Cold Chamber”

  Description: The main factors that cause the aging of materials is the sun and damp, xenon lamp test chamber use a xenon lamp simulating sunlight, condensation moisture simulating rain and dew, test the damage to material and product caused by sunlight, rain and dew. The test materials were placed in a programmed recycling environment with certain temperature of light and moisture alternate, take a few days or weeks you can … Continue reading “Laborotary Xenon Aging Chamber”

  Description: Thermal Shock Test Chamber, simulate an environment quick shift between extremely high temperature and extremely low temperature. It is use to tests chemical change and physical damage to the product by hot and cold temperature in a short time. This chamber divided into three sections: the high temperature chamber, the low temperature chamber … Continue reading “Thermal Shock Test Chamber”

  Description: This equipment is suitable for electronic, electric appliance, instrument, food, vehicles, metal, chemical, building materials, aerospace, medical, and other products, for quality detection. This equipment has the advantages of easy operate, fast heating, high precision, temperature be even and stable.   Features 　1. Test box made of stainless steel, shell made of SUS304 steel or A3 coating plate. 　2. Good performance silicone rubber … Continue reading “Temperature and Humidity Chamber”

  Description:   This chamber is design and manufactured accord to the requirements of IEC 60884, IEC60598 and relevant standards. It is use to simulate a high temperature environment to test the ability of material to withstand thermo-mechanical stress.   This machine can be wide used in many industries such as Electrical Appliances, Electrical wire … Continue reading “High Temperature Test Heating Chamber”

Introduction The batteries are to be tested in an ambient temperature of 20 ±5°C. A test sample battery is to be placed on a flat surface. A 15.8 mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 ±0.46 kg (20 ±1 pound) weight is to be dropped … Continue reading “Battery Impact Tester”

Introduction This battery nail penetrating tester conform to GB/T2900.11-1988, IEC60086-4:2000,UL1642, UL2054 and other related standards. Specifications Test should be performed under temperature 20+/-5 centigrade, put the battery connected with thermocouple into fume hood, puncture the battery to the center of the largest surface with a diameter 2-8mm steel nail on a speed 10-40mm/s. Nail stay … Continue reading “Battery nail penetrating tester”

Detailed Product Description Standard:     IEC 61347-1:2012, Clause 14.6 Working Voltage: <1000Vac Working Frequency:     50/60Hz Working Current: <500Aac＜500Aac Flow:    160A +10% -0% Current Constantly Function: Current Test Device IEC 61347-1-2012-Figure 3 Test Circuit for Controlgear     Test principle This tester is a current test device developed according to the IEC … Continue reading “IEC 61347-1-2012 Figure 3 Test Circuit for Controlgear / Light Measurement Equipment”

Detailed Product Description Standard: Chapter 6.14 And Fig.3 Of IEC60598-2-20：2002、GB7000.9-2008 IP20 Lighting String: 25℃±5℃ ;10 Times More Than IP20 Lighting String: 25℃±5℃ ;10 Times Device Material: Molding Aluminum Ooden Cylinder: Ø250mm Weight: One,60N Method: Power-driven Trial Number: 1-99999times;can Be Preset   Flexible Lighting Cord Winding Tester   Device Briefing:   Flexible Lighting Cord Winding Tester … Continue reading “Power Driven Light Testing Equipment Flexible Lighting Cord Winding Tester”

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Standard: GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Bending Angle: 0～180º Adjustable（standard:135º At A Vertical Direction On Both Sides） Test Frequency: 1～10 T/ Min Test Number: 0～999999times Adjustable Working Voltage: AC220V 50HZ   Luminaire Adjustment Test Device   Product Info:   Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Function: Applied … Continue reading “PCL Control Luminaire Adjustment Test Device With LCD Panel Operation”

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Standard: IEC60061-3   Fluorescent Axial Force Tester   Product Info:   The test lamp holder should meet requirement of IEC60061-3 datasheet: Fluorescent with lamp hplder in place bear a pressure force in its axial direction applying to center of the lamp cap with 1minute ——-G5 lamp holder 15N ——-G13 … Continue reading “Electrical Light Testing Equipment Fluorescent Axial Force Tester”

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Standard: IEC62560   Axial Strength of Edison Caps   The lamps shall be screwed into gauge of Table 4. After full insertion an axial force of Table 4 is applied to the central contact. See IEC62560 Figure 7. In case axial strength of the cap does not decrease when … Continue reading “High Effcient Light Testing Equipment Axial Strength Of Edison Caps”

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Standard: IEC60598-1 Clause 4.4.4 Power: 220V 50Hz The Axial Force: 15N (bar Weight), 30N (superimposed By A 15N Vias Weight Onto The Bar) Fixtures: V-type Fixture, Front And Back Adjustable Holding Specimen Height Range: 0-250mm IEC60598-1 | Fluorescent Lamp Holder Axial Force Tester Luminaries Test Equipment   Product … Continue reading “220V 50Hz Axial Force Tester , Environmental Luminaries Test Equipment”

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Standard: IEC60558-1 Fig 6 And IEC60065 Fig14–16             IEC60558-1 Fig 6 Mandrel Tester Device Light Testing Equipment  Product information This tester conforms to IEC60558-1 Fig6 and IEC60065 Fig14–16.   The test shall be performed by fixing the specimens of thin sheets on a … Continue reading “IEC60558-1 Fig 6 Mandrel Test Equipment Apparatus Machine OEM / ODM Avaialble”

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Standard: IEC60598-2-20 Clause 113,Fig 2 Material: Stainless Steel Weight: One 15 N And One 30 N Applying Time: 1 Min Applying Distance: 3 ± 0, 8 Mm From The Insertion Points   Lampholder Copper Contacts Security Thrust Test Device     Product information:   The test apparatus is … Continue reading “Lampholder Contact Tester , Stainless Steel Testing Equipment Lampholder Copper Contacts Security Thrust Test Device”

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Standard: IEC60598-1 Clause 4.14.3 Size: 150*150*75mm Weight: 2kg   Lamps and Lanterns Adjusting Devices     Product information:   The device is used to detect adjustment device, and confirm to the IEC60598-1 clause 4.14.3. The adjustment device, equipped with the appropriate cable or cord shall be operated in … Continue reading “2kg Led Light Testing Equipment / Lamps And Lanterns Adjusting Devices”

Detailed Product Description Standard: GB2099.1-2008, IEC60884 Thickness Of The Mortar: 10mm ~ 15mm Size: 150*150*75mm Weight: 2kg   Temperature Rise Test Machine Installation Box   Standard Socket test box according to the requirements of the gb2099.1-2008, IEC60884 provide complete sets of equipment (including installation board was loose and coating materials requirements). Technical parameters 1, pine … Continue reading “Temperature Rise Test Equipment With GB20991-2008 / IEC60884 Standard”

Detailed Product Description Standard: IEC60598-2-20:6.14 Figure 3 Weight: 60N*1 Diameter Of Cylinder: 250mm Material: Wood   Test Device Suitable For Winding A Flexible Pipe     Product information: Conform to standard: IEC60598-2-20:6.14 Figure 3, it is used to test the mechanical strength of the light string. Weight: 60N*1 Diameter of cylinder (mm): 250mm Material: Wood … Continue reading “60598 – 2 – 20 Wood Material Light Testing Equipment For Winding A Flexible Pipe”

Detailed Product Description Standard: GB5013 And UL1581 Etc Heating Power: 4.5 KW Volume Of The Water Tank:: 550 X350X500 (can Be Customized) Temperature Range: Room Temperature ~95±1℃   Constant Temperature Water Bath     Product information:   This device meets the test equipment requirements of GB5013 and UL1581 etc. And mating usage of other devices, … Continue reading “Light Testing Equipment Constant Temperature Water Bath PID Temperature Control System”

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Standard: IEC60598-2-20 Fig 2   Test Device Suitable For Checking Security of Lampholder Contacts     Product information: The device is used to check security of lampholder contacts, and conform to the IEC60598-2-20 Fig 2. The incandescent lamp is removed and a force of 15 N is applied … Continue reading “IEC Test Equipment For Checking Security Of Lampholder Contacts”

Detailed Product Description Environment: 0℃～+40℃ Power Supply: 220V±10% 50Hz Tilt Angle: 0-30 ° Stepless Adjustable Precision: ± 0.5 ° Maximum Weight Load: 50kg Motor Speed: 0.50r/min   Light Testing Equipment Lamp Tilt Test Bench 0-30 Degree GB7000     Product information:   This device complies with GB7000 and other standards, the device consists of a … Continue reading “Led Lamp Testing Equipment , Led Testing Equipment 0-30 Degree GB7000”

Detailed Product Description Equipment Material: Aluminum Material Log Diameter: – 250mm Weight: 60N, 1 Test Mode: Electric   Lamp String Flexible Rope Winding Test Device​     Equipment overview: Lamp string soft rope winding test device to meet the IEC60598-2-20:2002, GB7000.9-2008 the 6.14 chapters test requirements and figure 3 requirements made; this device mainly examine … Continue reading “Aluminum Material Light Testing Equipment Lamp String Flexible Rope Winding Test Device”

Detailed Product Description Control System: German Siemens Colorful Touch Screen And PLC Control Dynamical System: Original Japan Panasonic Servo Motor Test Work Position: 1 Work Position Test Speed: 10±2r/min Optional Casing Pipe Diameter: 6.5 Mm And 9.5 Mm. Rotary Radius: 30～100mm   Wire Damage Degree Tester   Usage   to test wire damage degree of … Continue reading “Stainless Steel Wire Testing Machine , Wire Damage Degree Tester Touch Screen”

Detailed Product Description Standard: GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000 Suitable Luminaire: Floodlight Luminaire Bending Angle: 0～180º Adjustable Test Frequency: 1～10 T/ Min Test Time: 0～999999times Adjustable Working Voltage: AC220V 50HZ   Luminaire Adjustment Test Device     Meet standards of GB/7000.1-2002 Chapter 4.14. And EN60598-1:2000   Function:   Applied to testing adjustment device with soft … Continue reading “PCL Control Led Light Tester Luminaire Adjustment Test Device Easy Operation”

Detailed Product Description Operating Voltage: AC 220-240V 50Hz~60Hz Energy Consumption（max）: 50 W Dimension: D6500mm×W320mm×H460mm Maximum Tolerance Pressure: 2500 Vrms Insulating Resistor: 500M Fundamental Frequency: 45Hz~65Hz   Rectifier effect comprehensive test system      Technical Parameter: 1. Operating voltage:AC 220-240V 50Hz~60Hz 2. Energy consumption(max):50 W 3. Dimension:about D6500mm×W320mm×H460mm 4. Maximum tolerance pressure: 2500 Vrms 5. Insulating … Continue reading “50W Light Measurement Equipment Rectifier Effect Comprehensive Test System”

Detailed Product Description Mechanical Requirements Of Testing Rack: 2000（H）*1400（L）*800（W） Layers /set: 4 Lights/layer: 50 Lights/rack: 200 Carrying Capacity: 45W/5A Voltage Range: 12V~270V   Led Life Test System     Technical Requirement   1. LED lighting product’s aging rack and control system: LED lighting product’s aging rack and control system consist of testing rack,on-site control system, … Continue reading “Professional Light Testing Equipment Led Life Test System 2000H*1400L*800W”

Detailed Product Description Test Temperature: Can Reach 55℃ With Accuracy Of ±2℃ Test Voltage: 80 ~ 250 VAC Test Duration: 1000 Hours External Dimension: According To Customer’s Requirement Test: G5,G13,E14,E27,E40 And Other Type Installation Site: Height More Than 2300mm.   LED Aging Test Device / LED Temperature Rising Test Device / Light Source Aging Test … Continue reading “Light Testing Equipment LED Aging Test Device 1000 Hours Test Duration”

Detailed Product Description Standard: IEC60065 Figure 6 And UL1310 Clause 40.2 Metal Pin: φ5 Mm，mass Of 100 G & φ6.35 Mm Mass Of 50 G   Dielectric Strength Test Instrument IEC60238 Figure 36 – Example of electric strength test instrument for solid insulation   Product details:   Model :KP-CK10. To test the surge strength according … Continue reading “KP-CK10 Dielectric Strength Test Equipment For Testing Surge Strength , IEC60238-Figure 36”

Detailed Product Description Standard: IEC 61558 Figure 6 Weight: 100N*1，50N*1( The Pulling Force Of 50N, 100N, 150N Can Be Achieved Rotate Angle: 230° Test Mandrel: Triangle Bar With A Tip Including Metal Foil Test Voltage: At Least 5 KV Thin Sheet: 70 Mm In Width Test arrangement for checking mechanical withstanding of insulating materials in … Continue reading “5kV IT Test Equipment For Checking Mechanical Withstanding Of Insulating Materials In Thin Sheet Layers”

Detailed Product Description Material: Nylon+Stainless Steel Standards: IEC62368-1 Weight: 1.5kg Warranty: 1 Year   Straight unjointed version of the respective test probe applied with a force of 30N , IEC62368-1-Figure V.1   Jointed test probe for equipment likely to be accessible to children   Reference Standard: IEC62368-1-Figure V.1   Specification: Test Finger Length:234mm   Tag: … Continue reading “Straight Unjointed Version Respective Test Probe As Per IEC 62368-1”

Detailed Product Description Weight: 2 Kg Dimensions: 290x270x60 Mm (LxWxH) Supply: 220 VAC 50 Hz Standards: IEC60065 Channels: 0° Or 90° Pink Noise: 1000 Hz This Pink Noise Generator meets the requirements for pink noise in IEC 60065, Clause 4.2 and 4.3 and IEC 62368-1, Annex E. It is especially developed for all types of tone … Continue reading “Pink Noise Generator IT Test Equipment IEC 60065 Clause 4.2 and 4.3 and IEC 62368-1 Annex E”

The TOS7200 is an insulation resistance tester available for a wide range of various electric and electronic components, as well as electric and electronic equipment. Output voltage can be optionally set in the range of -25 to -1000 Vdc with a resolution of 1 V. As it is fitted with a window comparator and timer function, the tester is capable of efficiently conducting insulation resistance tests based on various safety standards.

Detailed Product Description   Antenna coaxial sockets mounted on the apparatus Antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate HAZARDOUS LIVE parts from ACCESSIBLE parts, shall be so constructed as to withstand such mechanical stresses as may be expected in the intended use. Compliance is checked by the following … Continue reading “Mechanical Test Finger Probe Antenna Coaxial Sockets For Endurance Test”

Detailed Product Description Diameter: 12mm Length: 80mm Standard: IEC60950, GB4943   IT Test Probe   Ø12mm, 80mm long with tip radius 6mm Conforms to IEC60950, GB4943 Tag: Ul Finger Probe, Articulated Finger Probe

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Diameter: Ø1mm Length: 100mm Standard: IEC60065, IEC60529, IEC61032   IEC60529 Test Wire 1.0mm, IP4X   Conforms to IEC60065, IEC60529, IEC61032     Tag: Ul Finger Probe, Articulated Finger Probe

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Diameter: Ø2.5mm Length: 100mm Standard: IEC60065, IEC60529, IEC61032   IEC 60529 Test rod 2.5mm, IP3X   Usage This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.   Tag: Articulated … Continue reading “IP3X Test Finger Probe IEC 60529 Test Rod 2.5mm”

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Standard: IEC 60529   IEC 60529 Test Sphere50mm , IP1X   This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with the back of the hand. Tag: Articulated Finger Probe, Jointed Test … Continue reading “Professional Test Finger Probe IEC 60529 Test Sphere 50mm IP1X”

This rigid finger probe conforms to the standard requirement of IEC61032 figure 7 device 11, IEC60884, IEC60598, IEC60335, IEC60065. It is used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or internal barriers.

Detailed Product Description Standard: IEC 60950, IEC 60065, UL And CSA Standard Usage: Check Access To TNV   Telecom Test Probe   Usage: Check access to telecommunications voltages. The Telecom Access Probe is required in IEC 60950, IEC 60065, UL and CSA Standards. It is used to check limited access to telecommunications voltages (TNV), mainly … Continue reading “Test Finger Probe Telecom Test Probe For Testing Telecommunications Voltages”

Detailed Product Description Place Of Origin: Guangdong,China(mainland) Standard: UL 60950   Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could touch hazardous parts of some shredders.   Tag: Articulated Finger Probe, Jointed Test Finger

Detailed Product Description material: metal, except where otherwise specified linear dimensions in milimeters   tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in the same plane and the same direction through an angle of 90°with a 0 to +10° … Continue reading “IEC60335 / IEC60950 / IEC 61032 Test Probe B Jointed Test Finger”

Home ProductsTest Finger Probe KingPo UL Test Finger , Ul Finger Probe With UL153 / UL507 / UL1026 / UL1082 KingPo UL Test Finger , Ul Finger Probe With UL153 / UL507 / UL1026 / UL1082 Product Details: Place of Origin: China Brand Name: KingPo Certification: Calibration Certificate Payment & Shipping Terms: Minimum Order Quantity: … Continue reading “UL Test Finger , Ul Finger Probe With UL153 / UL507 / UL1026 / UL1082”

Detailed Product Description Width: 8mm Thickness: 1mm Length: 108mm Standard: IEC60065   Test Hook​   Product information:   The test hook complies with IEC60065. It is used to test whether the dangerous electric parts can be touched. The test hook is “hooked” into vents and seams in the enclosure & then pulled with a force … Continue reading “IEC60065 Test Hook For Testing Electric Parts Stainless Steel Material”

Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test temperature( 550 ℃ ～ 960 ℃) for 1min and then broil the specimen using required pressure (1.0N) for 30s at vertical direction;to check whether the specimen and bedding material ignite and lasting ignition time to test the ignition fatalness of electrical and electronic finished devices

Detailed Product Description Needle-shaped Burner: Higher Than 35mm Stainless Steel Pinhead: Φ0.9mm-Φ0.5mm Burner Angle: 0°、20°、45°adjustable Flame Height: 12mm ± 1mm Ignition Gas: Butane Or Propane With More Than 95% Purity Test Temperature: 0~1000℃ Needle Flame Tester   Brief Introduction   Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to … Continue reading “Needle Flame Test Apparatus With Automatic Control”

Detailed Product Description Electrode Material: Brass Electrode Head — Platinum Welding Force: 1.0±0.05N Electrode Distance: 4.0mm ± 0.01mm ，angle: 60°±5 Electrode Pressure: 100~600V（48~60HZ）adjustable Droplet Height: 30~40mm Adjustable Droplet Size: 44~55 Drops/1cm³ Adjustable   Tracking Tester   Brief Introduction Tracking tester(Tracking Index Test)is a simulation experiment project using non-flame ignition source in accordance to standard requirements … Continue reading “Comparative Tracking Index Tester with High Accuracy”

Detailed Product Description Burner: 1 Set Of Bunsen Burner At An Inside Diameter Of Φ9.5mm ± 0.3mm Test Angle: 0°、20°、45° Manual Conversion Flame Height: 20mm ± 2mm ~180mm±10mm Adjustable Ignition Exertion Time: 0-999.9s±0.1s Adjustable Residual Flame: 0-999.9s±0.1s Residual Broil: 0-999.9s±0.1s   Horizontal-Vertical Flame Chamber Tester     Brief Introduction   Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC … Continue reading “Vertical Flammability Test Apparatus”

Detailed Product Description Resolution Ratio: AD：16bit；DA：12bit Input Impedance: ≥1MΩ Constant Voltage Range: 100mV~20V Minimum Discharge Voltage: 2.5V Current Output Range/channel: 50mA~10A Constant Voltage Cut-off Current: 0.02A BTS-20V10A Battery Testing System , Battery Continuous charge , Battery Forced Discharge Technical Parameter: BTS-20V10A Battery tester Model Number: BTS- 20 V 10 A Battery tester Material code: CT-3008 … Continue reading “BTS-20V10A Battery Testing System , Battery Testing Equipment With Calibration Certificate”

Detailed Product Description Type: Three Tanks Weight: 180kg Internal Space: 300mm*300mm*300mm Steel Nail: ф2mm—ф8mm High Temperature Resistant Space Between Battery Surface And Nail Point: 150mm Penetrating Speed: 10—40mm/s   Battery nail penetrating testing machine     Function Test safety capability of battery. Nail penetrates the specimen battery and check whether it will fire or explode … Continue reading “Three Tanks Battery Testing Machine / Battery Nail Penetration Tester KP-8112”

Detailed Product Description Volume（mm）: 1000×1000×1000（D×W×H） Dimension（MM）: 1200×1500×1950（D×W×H） Oscillating Tube Radius（mm）: 400 Flow Rate: 0.07 L/min +5% Pressure（Kpa）: 80-150 Turntable Rotate Speed（rpm）: 1 ~5 Adjustable   IP1/2/3/4-1000 Rain Test Chamber   This equipment can be use to inspect the ability of electrical product shell protect product and accessories to rain. This equipment can simulate drip water, spray … Continue reading “Low Noise Rain Test Chamber , Rain Test Equipment Machine High Precision”

The oscillating tube is provided with spray holes over an arc of 60°either side of the centre point. The support is not preforated. The enclosure to be tested is placed at the centre point of the semicircle. The tube is caused to oscillate through an angle of 120°, 60°on either side of the vertical, the time for one complete oscillation (2 x 120°)being about 4s and the test duration being 5 min.

Detailed Product Description Spray Bore Diameter: ￠0.4MM Blowhole Spacing: 50mm Spray Flow: 0.07L/Min Spray Pressure: 80-150KPA Pendulum Angle: 360°±20° Turntable Speed: 3r±1Min Water Spray Tester-IP3/4   Function Description The chamber is applicable to check whether the device and components are ensured good performance when electrical product and its outer case are sealed in a raining … Continue reading “IP Testing Equipment Water Spray Tester”